The Custom KING PIN REMOVAL TOOL is used to remove and install King Pins from and into Roll-Line Frames.

Skate US Custom KING PIN REMOVAL TOOL

Skates USCustom KING PIN REMOVAL TOOLforRoll-Line Frames.

Features

Features

Skate US Custom KING PIN REMOVAL TOOL

Skates USdeveloped this tool with the desire of being able to remove and install King Pins without damaging the King Pins, as happens when standard wrenches are used and without damaging the Frames.

TheSkates USCustom KING PIN REMOVAL TOOLis designed to be mounted into a well secured bench Vise (the best method) or can be used with a Breaker Bar or Large Screw Driver (in case of emergency or if a proper Vise is not available).

The King Pin is slipped into theCustom KING PIN REMOVAL TOOLmaking sure that the 16mm Flats on the King Pin are securely positioned into the Tool, then rotate the entire Frame (Plate) Left to Loosen or Right to Tighten the King Pins. When removing the King Pins, a large amount of force will probably be needed, as the King Pins are installed with Removable Lock-Tite (Blue) to provide extra security and prevent the King Ping from loosening up when skated on.

Please Note:ALWAYSuseRemovable Lock-Tite(Blue) when installing King Pins in Frames and make extra sure that the King Pins are Securely and Firmly seated and tightened into the Frames. Wipe away the excess Lock-Tite immediately when the King Pins have been installed.